Dallas – Fort Worth Chimney Sweep Services
Professional Chimney Sweeping
In recent years, fireplaces, wood stoves, wood pellet stoves and furnaces have become very popular as economical, renewable, carbon-neutral heating methods. As the cost of fuel oil and propane increase, even more people are turning to wood as a more economical heating option.
But there are downsides to wood fireplaces and stoves. One of the biggest ones is that burning wood as fuel produces smoke, and wood smoke contains pollutants including both solid particles and gases.
As the smoke cools while it works its way up the chimney and comes in contact with the much cooler chimney pipe or liner, those gases liquefy, combine with the solids, condense into liquids, and become something called creosote.
Creosote is a gummy, combustible substance than coats the inside of a chimney. Depending on the temperature of the smoke, it can liquefy and form a tough coating that lines the inside of the chimney, or it can mix with other solids to produce a fluffy, flaky, porous substance that builds on itself and eventually plugs up the chimney.
Either way, creosote buildup is a very dangerous thing because creosote is highly combustible. It can cause chimney fires, which are no joke. They can burn as hot as 2,000° Fahrenheit. In fact, more than a third of all home fires in rural areas, where wood is most often used as a primary heat source, begin in the chimney.
Stages of Creosote Buildup
Stage One. Stage One creosote buildup is flaky and easy to remove. It comes right off when the chimney sweep works his or her brush through the chimney.
Stage Two. If creosote isn’t removed while it’s in Stage One, it can begin to harden and adhere to the inside of the chimney. It takes on a gummy, tar-like consistency that gradually hardens into a crusty coating that must be removed with powered, rotary chimney cleaning equipment.
Stage Three. If the chimney is neglected even after Stage Two creosote has formed, the fire hazard becomes critical. The creosote forms a highly-flammable glaze that can be ignited by the heat from the fireplace or stove, and fuel a chimney fire. Stage Three creosote usually cannot be removed without damaging the chimney liner. Usually the liner will have to be replaced.
Please note that a standard chimney sweeping does not include removing Stage Two or Stage Three creosote, nor repairs to the chimney if needed. These services are available at an additional charge which will be explained to you before the work is done.
Preventing Chimney Fires
The good news is that the risk of chimney fires can be greatly reduced by regular chimney maintenance.
The most important part of chimney maintenance is having your chimney inspected and professionally cleaned by a qualified chimney sweep at least once a year, preferably in the fall, before the start of the heating season. Clean chimneys don’t catch on fire.
An annual inspection can also detect other chimney problems that can be easily corrected before they become big problems that threaten your family’s safety — or your bank account.
A professional chimney sweep will look for problems like weather damage to bricks and mortar, cracks, loose or damaged chimney linings, or bird or animal nests during the inspection.
In addition to regular chimney maintenance and cleaning, here are some other rules to reduce creosote formation and reduce the risk of chimney fires:
- Always burn only the fuel(s) for which your fireplace, wood stove, or wood furnace was designed and is approved.
- Never burn paper, cardboard, treated lumber, plywood, particle board, or finished wood in your wood burner. These materials can contain inks, dyes, waxes, glues, and other dangerous chemicals.
- Never burn any sort of plastic or rubber in your wood-burning fireplace, stove, or furnace.
- Don’t use flammable liquids as fire starters.
- Make sure that cordwood has been properly seasoned or kiln-dried before burning it. Unseasoned wood contains way too much moisture to burn cleanly, greatly accelerating creosote formation. Ideally, softwoods like pine and fir should be seasoned for at least a year after being felled, and at six months should pass between splitting and burning. Hardwoods like oak, maple, and walnut should be seasoned for at least two year after being felled, and at a year should pass between splitting and burning.
- If approved for use in your wood burner, high-quality manufactured logs made from compressed wood scraps and sawdust usually burn hotter and cleaner than cordwood, resulting in less creosote production. (But they also absorb moisture like sponges, so make sure to store them in a dry place.)
Other Chimney Services
Dallas / Fort Worth Chimney Repair Services
Professional Chimney Repairs
ALLGone Services provides professional chimney repair and chimney restoration services throughout the Greater Dallas – Fort Worth area.
Chimneys take a lot of abuse. Besides being exposed to the elements, chimneys have to deal with rapid and dramatic temperature shifts, animals that try to bend back the flashing so they can get into the house, and birds whose droppings can damage and deface the brickwork or other exterior surface of the chimney.
Over time, these changes can compound themselves. For example, rainwater can get trapped between the chimney and its liner, causing damage when the temperature goes below freezing, and then again when a fire is started and the chimney heats up.
Chimney damage from exposure to weather and elements can be repaired by strengthening the masonry work, replacing loose bricks, and adding a new crown. ALLGone Services has the skill and experience to restore your chimney’s appearance and function.
Custom Chimney Cap Installation
ALLGone Services installs all kinds of chimney caps and pots, and can custom-fabricate chimney caps for any chimney — even hard-to-fit ones.
At ALLGone, we understand that chimney caps serve a practical purpose, but they also affect the looks and value of your home. That’s why we take the time to discuss the best options to make your chimney cap “fit in” with your home, so it looks like it was there from the day your house was built.
We can make your chimney cap out of brand-new, shiny metal if you like (like the one in the picture on the right) and wait for time and the elements to season the metal naturally. But if you have an old, distinguished home with lots of character, and you want the chimney cap to look more natural, we can fabricate and install a pre-weathered chimney cap that already looks as distinguished as the rest of your stately, older home.
Your Full-Service Chimney Company
We provide all kinds of chimney repairs and maintenance throughout the Dallas – Fort Metropolitan area, including:
- Chimney Inspection and Cleaning.
- Bird and Animal Removal and Exclusion.
- Chimney Repairs (filling cracks, replacing damaged bricks and mortar, re-facing, chimney crown repairs, replacing flashing, etc.).
- Chimney Liner Replacement.
- Chimney Damper Installation and Repair. A properly functioning chimney damper is essential for your proper ventilation of noxious fumes, fire safety, and energy efficiency.
- Custom Chimney Cap and Chimney Pot Installation (pottery, copper, steel, stainless, and all types of metals).
- Complete Chimney Rebuilding and Restoration.
For more information about chimney repairs or any of our quality services, please call us at (817) 589-1632.
CONTROL PESTS NOW… ALL GONE SERVICES (817) 589-1632